Thunder Beast Arms Dominus .30cal HUB Interface Black Suppressor

Buy the Thunder Beast Arms Dominus Suppressor at BattleHawk Armory!This suppressor uses Thunder Beast Arms' HUB interface mounting system. It is not sold with a HUB mount.This is so you can select the correct HUB mount to match the threads on your barrel or,If you have a suitable mount from another manufacturer you would not need a HUB mount for this suppressor (See HUB Interface Disclaimer Below)The DOMINUS-HUB is a high-performance .30 caliber suppressor. It delivers three principal design goals:1. light-weight titanium construction;2. best-in-class repeatability and accuracy; and3. similar suppression to the Ultra series .The DOMINUS-HUB is based on our DOMINUS-SR suppressor, but uses the HUB interface mount. Please refer to the DOMINUS-SR specifications page for more information about the SR. The HUB interface mount derates the retention level from full-auto capable but the resulting suppressor is lighter, shorter, and less expensive vs. the DOMINUS-SR.Compared to the ULTRA 7, the DOMINUS-HUB is 0.75" shorter and larger in diameter by 0.30", but about 2 dB quieter. It meters at 137 dB (milspec left/right) and 126 dB at shooters-ear on a 20-inch .308. This puts it right between the Ultra 7 and Ultra 9, These are numbers from Thunder Beast Arms (TBAC) PULSE system which should be considered definitive, supplanting all data from the older 2209 sound-level meters.The DOMINUS-HUB is shorter but fatter than the ULTRA series, and about the same weight per volume. It is 6.25 inches long and 1.8 inches in diameter. The DOMINUS-HUB itself weighs 9.6 ounces.HUB Interface DisclaimerThe HUB interface version of this suppressor is meant for advanced users who are familiar with HUB-compatible mounts and know how to use their choice of HUB mounting system in a secure, reliable, and repeatable manner. If you get the HUB version, you should know what you're doing. Everything behind the suppressor body is your responsibility.We are not responsible for damage caused to this suppressor by another manufacturer's HUB mount system, through its use, misuse, incompatibilities, or any other reason related to the mounting system.For our part, we will guarantee that the HUB interface is correct and the suppressor will have acceptably-low runout when mounted on a TBAC reference HUB/DT interface.Application Notes5.5" = .300blk (sub and super sonic)7.5" = 6.8 SPC, 7.62x39mm10.3" = .223rem, 5.56mm, 6.5 Grendel12.5" = .308win, .260rem, 6.5 Creedmoor16" = 6.5 SAUM, 6.5 PRC, 7 WSM, 7 SAUM, 7 RM, 300 WSM18" = 300 WM20" = 7 STW22" = 26 Nosler, 28 Nosler, 300 WBY, 6.5-300 WBY26" = 7 RUM, 300 Norma, 300 RUM, 300 PRCSpecificationCaliber: .30cal up to .300 RUMMaterial: TitaniumLength: 6.25"Diameter: 1.8"Mount: HUB InterfaceWeight: 9.6ozFinish: Black Cerakote